vgotel ocean 5 flash file

SP7731GEA_scx35_sp7731gea_4.4.2_VGOTEL_OCEAN5_V05_20151028_Ocean5

 

 

 

 

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : VGOTEL
Device Model   : scx35_sp7731gea
Device CPU     : sp7731gea
Device IntName : scx35_sp7731geaplus_dt
Device Version : 4.4.2
Device Compile : 10/28/2015 3:14:17 AM
Device Project : VGOTEL_OCEAN5_V05_20151028
Device ExtInfo : Ocean5

 

 

 

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 300 only 

q mobile black two flash file

SP7731CEA_Black_Two_6.0_QMobile_BlackTwo_MP_21_06_QMobile_Black_Two

Phone found! [ 232 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Black_Two
Model Brand : QMobile
Model Device: Black_Two
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : QMobile BlackTwo_MP_21_06
Model Ext   : QMobile Black Two

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2431 MiB
Saved to : C:\Users\Desktop\black two\SP7731CEA_Black_Two_6.0_QMobile_BlackTwo_MP_21_06_QMobile_Black_Two\
Done!

Elapsed: 00:09:55

Reconnect Power/Cable!

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 200 only 

vgotel ocean 9 flash file

 

Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC983x] eMMC [Generic Android 7.x]

Set mode to : [AltLDR] SP [SC983x] eMMC [Generic Android 7.x]

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key

3. Insert cable

 ====  Wait for phone...

Phone found! [ 13 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC9832 eMMC loader v2.1 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 13 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC9832 eMMC loader v2.1 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ...

Phone found! [ 13 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC9832 eMMC loader v2.1 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : Ocean_9

Model Brand : VGOTEL

Model Device: Ocean_9

AndrVersion : 7.0

BaseBand CPU: OCEAN_9

Project Ver : Ocean 9_V09_20171025

Model Ext   : Ocean_9

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : nvitem_l.bin

[Read Ok] : sc983x_cp1.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : l__WPH_arm7.bin

[Read Ok] : PM_arm7_sys.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : wcn_fdl.bin

[Read Ok] : AA_MARLIN.bin

[Read Ok] : boot.img

[Read Ok] : trustos.bin

[Read Ok] : vmm.bin

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 3258 MiB

Saved to : C:\Users\my computer\Desktop\OCEAN_9_Ocean_9_7.0_Ocean_9_V09_20171025_Ocean_9\

Done!

Elapsed: 00:12:04

Reconnect Power/Cable!

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 200 only 

 

 

 

MT6580__GFIVE__Gpower_5__Gpower_5__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P23

 

 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513832334D4200C6AFE07333E1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D4200C6AFE07333E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xEE6AE9A2B5229D39F42D04B799BBCFA7
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : GFIVE
ProdName  : Gpower 5
ProdModel : Gpower 5
Device    : Gpower 5
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P23

[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1986 MiB
Scatter saved to : C:\Users\my computer\Desktop\MT6580__GFIVE__Gpower_5__Gpower_5__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P23\

All done!

Done!
Elapsed: 00:08:15
Reconnect Power/Cable!
 

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 300 only

 

avenger tool backup  

mione x7 firmware

MT6582__X7__X7__X7__5.0__ALPS.L0.MP2.V1_KEYTAK6582.WT.L_P9

 

 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6582

BB_CPU_NME : [MediaTek] MT6582_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x87

NAND Flash : NOT INSTALLED

eMMC Flash : 1501004B3858564D4201E02CE43E8187

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BMVX8

[eMMC] : FLASH_CID : 1501004B3858564D4201E02CE43E8187

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0xEE6AE9A2485D23E951B584F5E854FB3C

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : X7

ProdName  : X7

ProdModel : X7

Device    : X7

AndroidVer: 5.0

MTKxCPU   : MT6582

MTKxPRJ   : ALPS.L0.MP2.V1_KEYTAK6582.WT.L_P9

[Read Ok] : preloader_keytak6582_wt_l.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / keytak6582_wt_l / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1750 MiB

Scatter saved to : C:\Users\my computer\Desktop\mione\MT6582__X7__X7__X7__5.0__ALPS.L0.MP2.V1_KEYTAK6582.WT.L_P9\

All done!

Done!

Elapsed: 00:08:06

Reconnect Power/Cable!

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 300 only 

avg backup  

vgotel venture v8 firmware

MT6580__VGOTEL__Venture_V8__Venture_V8__5.1__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P22

 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513832334D42002249AAA72317
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42002249AAA72317
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xEE6AE9A2E3C24D5529129E8A1C06E965
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : VGOTEL
ProdName  : Venture V8
ProdModel : Venture V8
Device    : Venture V8
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P22

[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2011 MiB
Scatter saved to : C:\Users\my computer\Desktop\MT6580__VGOTEL__Venture_V8__Venture_V8__5.1__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P22\

All done!

Done!
Elapsed: 00:08:29
Reconnect Power/Cable!

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 300 only 

MT6572_4.4.2__J7220L_3G_5.0_V1.2

Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E3958524D420015C6CA3E41A3
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x10000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D420015C6CA3E41A3
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x0000000070000000
[eMMC] : FLASH_UCP : 1792 MiB [eMMC 2 GiB]
DEV RID    : 0xF127BCA31BA680D2F02FAE5BC4140224
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
USBDL : Init HSUSB Ok!

AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : J7220L_3G_5.0_V1.2

[Read Ok] : preloader_j7220l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / j7220l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 691 MiB
Scatter saved to : C:\Users\rose_petal\Desktop\J200\MT6572_____4.4.2__J7220L_3G_5.0_V1.2\

All done!

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 200 only 

 

 

 

 

 

 

MT6580__DANY_TECHNOLOGIES_HK_LTD__Genius_Talk_T460_Ultra__DANY_TECHNOLOGIES_HK_LTD__5.1__ALPS.L1.MP6.V2_ELINK8321.EMMC_P8

Genius Talk T460 Ultra 

 

 

 

 

 

 

 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E43617264204194218156236F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E43617264204194218156236F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0xEE6AE9A2B31842168C8AACD99E79FFD4
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : DANY TECHNOLOGIES HK LTD
ProdName  : DANY_TECHNOLOGIES_HK_LTD
ProdModel : Genius Talk T460 Ultra
Device    : DANY_TECHNOLOGIES_HK_LTD
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_ELINK8321.EMMC_P8

[Read Ok] : preloader_elink8321_emmc.bin
[Read Ok] : items.img
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / elink8321_emmc / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2449 MiB
Scatter saved to : C:\Users\my computer\Desktop\MT6580__DANY_TECHNOLOGIES_HK_LTD__Genius_Talk_T460_Ultra__DANY_TECHNOLOGIES_HK_LTD__5.1__ALPS.L1.MP6.V2_ELINK8321.EMMC_P8\

All done!

Done!
Elapsed: 00:12:40
Reconnect Power/Cable!

 

 

 

 

 

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs-400 only 

 

 

 

 

 

avenger tool backup 

 

 

 

 

 

 

 

 

 

 

mione i7s plus flash file

MT6580__alps__i7s_Plus__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P45

 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 1F01005348503830364A00000059C303
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x1F , OEM : 0100
[eMMC] : FLASH_INF : [NOT_IN_BASE] , 608PH
[eMMC] : FLASH_CID : 1F01005348503830364A00000059C303
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D4400000
[eMMC] : FLASH_UCP : 7492 MiB [eMMC 8 GiB]
DEV RID    : 0xEE6AE9A20EB885E8A02B941830CC0774
INT RAM    : 0x00020000
EXT RAM    : 0x30000000 [768 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : i7s Plus
ProdModel : i7s Plus
Device    : magc6580_we_l
AndroidVer: 5.1
CU_SWVer  : V1.1.3
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_MAGC6580.WE.L_P45

[Read Ok] : preloader_magc6580_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_we_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1391 MiB
Scatter saved to : C:\Users\my computer\Desktop\MT6580__alps__i7s_Plus__magc6580_we_l__5.1__ALPS.L1.MP6.V2_MAGC6580.WE.L_P45\

All done!

Done!
Elapsed: 00:07:31
Reconnect Power/Cable!

file is paid & psw protected for pass can contact skype  or  call 

 

skype  =  fileforsale@gmail.com

 

call  =  0323-8236268

 

rs 300 only 

 

 

 

 

avg backup